The water quality distribution network monitoring solution for the water industry 4.0
pipe::scan is a multi-parameter water quality monitoring station that is mounted directly on a pipe in the distribution network in pressures up to ten bar.
Measure chlorine, pH, conductivity, pressure, turbidity, organics(UV254, DOC, TOC), colour and temperature in any combination using proven s::can sensors.
Unique features of pipe::scan
Complete suite of water quality parameters possible – everything you might want to measure in a network.
The only such system able to measure colour and organics as well as standard parameters – identify DBP formation potential hotspots and ensure discolouration is identified early before it gets to the customers tap
Unique nanopump for sampling – nothing protrudes into the pipe and even works in stagnant conditions
Ability to measure water quality in pressures up to ten bar
Hot maintenance possible – each sensor can be removed for maintenance without interrupting the flow or pressure
Compatible with ana::tool event detection software – create alarms based on multiple parameters rather than just single ones
Compatible with the low power concube controller – send the real-time data to any central data monitoring centre via almost any communication protocol
pipe::scan compatible sensors
The sensors utilised in the pipe::scan are the already proven combination.
For turbidity (ISO 7027 or US EPA 180.1), colour and organics.
With a low power consumption and small footprint, the pipe::scan can be installed in almost any location. Incorporating multiple pipe::scan systems into a network enables a complete picture of the water quality in the system.
Need some advice or support? We’re here to help.
If you need a call back about how Process Measurement and Analysis can help you or have any questions at all please feel free to contact us at [email protected]. A member of our experienced team will contact you directly.