spectro::lyser V3

Realise the power of online UV-Vis spectrophotometers for water quality monitoring with the V3 s::can spectro::lyser
Online UV-Vis spectroscopy

light. speed ahead.

A fully submersible online water quality sensor for drinking water and wastewater analysis. Achieve process control or compliance whatever your needs.

s::can specialise in online UV-Vis spectroscopy for water quality monitoring. Utilising the power of chemistry to derive large amounts of information about water quality, whether drinking water or wastewater from the UV-Vis spectrum. s::can’s proprietory algorithms for turbidity compensation set them apart from other online sensors. By measuring turbidity at multiple wavelengths across the spectrum, only s::can sensors can measure accurately even in spates and other highly turbid applications.

The latest generation in UV-Vis spectrophotometers.

The UV-Vis spectrum as produced by a spectro::lyser showing both the raw spectrum and the turbidity compensated spectrum.

The graph below shows the effect of turbidity on the UV-Vis spectrum. Only by being able to compensate effectively for turbidity at all wavelengths can true accuracy for UV254, true colour and more be achieved.

Online UV-Vis spectroscopy

Benefits in a nutshell

  • Access the full UV-Vis spectrum data for a better understanding of water quality
  • Multiparameter monitoring in a flash with online UV-Vis spectroscopy
  • Ditch the controller! – Connect your sensor directly to your SCADA/DCS via a web browser. No additional software required.
  • Stable and robust Xenon flash lamp optics – long lifetime in the field
  • Unique turbidity compensation approach – accurate measurement even in highly turbid samples
  • Plug and measure – pre-calibrated based on years of experience in different applications
  • No consumables or reagents required – a low TotEx approach
  • Multiple installation approaches available – direct in-process and flow cell
  • Configurable to your application whether drinking water, wastewater or process water – adjust the path length to suit your sample
  • Ideal for use in remote monitoring – power consumption as low as 60mW and a large onboard data storage capacity

Specialists in online UV-Vis spectroscopy

View Brochure and datasheets

Download Brochure

English language version

Drinking water datasheet

English language version

Wastewater datasheet

English language version

The next generation

Intelligent IoT enabled online UV-Vis spectrophotometer with integrated webserver for smart water quality monitoring.

Multiparameter monitoring in a flash. Choose the parameters you want to measure for your application from any that can be derived from the UV-Vis spectrum.

Drinking Water

In drinking water applications, use the V3 s::can spectro::lyser for UV254, colour, nitrate, DOC, TOC, BTX, turbidity and of course use the full UV-Vis spectrum for event detection. The spectro::lyser is ideal for raw water coagulation control applications and catchment monitoring.

 

Create your own monitoring station by pairing your optical spectro::lyser sensor with a s::can sensor for other parameters such as pH, conductivity, fluoride and more.

Wastewater

In wastewater applications, utilise the V3 s::can spectro::lyser for COD, BOD, TOC, nitrate, nitrite, hydrogen sulphide (H2S), total suspended solids (TSS) and of course use the full UV-Vis spectrum. The spectro::lyser is ideal for inlet monitoring, aeration tanks and effluent compliance applications.

 

Combine your optical spectro::lyser sensor with a s::can sensor for additional parameters including ammonium, pH and dissolved oxygen (DO).

Industrial Process Control

In industrial applications, utilise the V3 s::can spectro::lyser for ozone, COD, BOD, TOC, nitrate, nitrite, total suspended solids (TSS) and of course use the full UV-Vis spectrum. The spectro::lyser is ideal for process control, disinfection monitoring and effluent monitoring.

 

Monitor more than optical parameters with a s::can sensor for physical parameters including conductivity and pH.

The perfect measuring range and accuracy for every application

The spectro::lyser V3 is available with three different optical path lengths.

Online UV-Vis spectroscopy

drinking water: 35 mm

Online UV-Vis spectroscopy

surface water or wastewater effluent: 5 mm

Online UV-Vis spectroscopy

waste water: 1 mm

Wireless communication – Io::Tool

Intuitive web interface for data visualization and configuration of the V3 spectro::lyser – ditch the controller and connect your spectro::lyser directly to your DCS.

Online UV-Vis spectroscopy

Want to know more about how the s::can spectro::lyser and how online UV-Vis spectroscopy is used in water quality monitoring? Discover how it could help you by viewing our case studies and applications notes here.

View case studies and application notes below.

See the full s::can range

To contact us, or to request a callback, simply use the form below and we will promptly get back to you.

An even better reason to contact us about any of our products and services. Your enquiry will get into our new prize draw for HomePod mini.

We greatly value all of the inquiries which our products and services generate and we are very confident that we will have the right solution available for you at the first point of contact when you reach our experienced team of engineers. As an added incentive to any company in the UK, your enquiry about any of our products will get you entered into a prize draw to win a HomePod mini. So what are you waiting for?

List of recent PMA competition winners.

Need help with anything?

Contact us directly
at [email protected]

A bit about us

Established in 1971 PMA is a well-recognised provider of online instrumentation for process control and compliance monitoring. With expertise in analytical techniques such as Photometry, Colorimetry, Ion-selective electrodes (ISEs), Titration, Fluorescence, Ultrasonics and more.

© 2020 Process Measurement and Analysis Ltd, Water, Oil, Chemicals.

Customer Satisfaction Rating
0%

Customer satisfaction rating in compliance with ISO/TS 1004:2012: Quality Management System Guidelines

Slider