Slide

PTV 1000 turbidity analyser

Video guides to installation, calibration, verification and maintenance

Slide

The PTV 1000 turbidity analyser is designed for low-level turbidity applications such as final water drinking water.

It’s simple yet elegant design enables it to be easily installed, calibrated and verified by anyone and is simple and easy to maintain.

The short video tutorials below are designed to give you a brief introduction to installation, calibration, verification and maintenance of the PTV 1000 turbidity analyser.

Slide
Installing a PTV 1000 turbidity analyser
PlayPlay

Attaching the mounting cleat to the wall

A video to show the installation of the mounting cleat on a wall or backboard.

PlayPlay

Attaching the flow body onto the mounting cleat

A video to show the proper installation of the flow body.

PlayPlay

Installing the fluidics manager module

A quick guide to show the proper installation of the fluidics manager module

Slide
Calibrating a PTV 1000 turbidity analyser
PlayPlay

Calibrating a PTV 1000 turbidity analyser with a T Cal plus primary calibration standard

A quick guide to show the calibration of a PTV1000 with the 5NTU T Cal plus standard.

PlayPlay

Calibrating a PTV 1000 turbidity analyser with a primary calibration standard

A quick guide to show the calibration of a PTV1000 with a primary calibration standard provided in a bottle.

Slide
Verification of a PTV 1000 turbidity analyser
PlayPlay

Assigning a value to a dry verification block

Define the baseline value of the dry verification block for verifying the instrument optics in the future. In this video, a high dry verification block is used. The process of defining the baseline is the same for a low-level dry verification block.

Slide
Maintenance of a PTV 1000 turbidity analyser
PlayPlay

Disassembling the drain cover and replacing the o-ring and siphon tube.

Servicing of the drain cover where the flow switch is located, includes instructions on how to remove the flow body from the mounting cleat.

PlayPlay

Disassembling the integrated bubble trap for maintenance

Servicing of the bubble trap and replacing the o-ring.

PlayPlay

Maintenance of the light beam dump

Replacing the light beam dump which removes stray light from the flow body.

PlayPlay

Replacing the flow body drain valve

Removing and replacing the flow body drain valve and lanyard strap.

PlayPlay

Replacing the bubble trap knob

Disassembling the bubble trap knob and replacing it.

To contact us, or to request a callback, simply use the form below and we will promptly get back to you.

We greatly value all of the inquiries which our products and services generate and we are very confident that we will have the right solution available for you at the first point of contact when you reach our experienced team of engineers.